Nordic pulp and paper research journal issn

The coating colours were based on calcium carbonates of different particle sizes, lattices of different polarities and a carboxymethyl cellulose CMC thickener.

References to articles and other publications that are "Accepted for publication" are allowed with an appropriate indication of where they are to be published. The light absorption coefficient was greater for unbleached TMP than for unbleached SGW pulp and an increased quantity of fines increased the light absorption coefficient for both pulp types.

On the indirect polyelectrolyte titration of cellulosic fibers, Langmuir 22 2 Hello, I would very much appreciate the Nordic Pulp and Paper Journal reference style, as per their guidelines pasted below from http: Complete author instructions regarding citations: Name-year system for literature citations References in the running text are identified by means of the author s name sfollowed by the year of publication, all written within parentheses.

From Pulp Paper Can. Management of manuscripts will be handled through an online processing system used by De Gruyter. Pulp with addition of xylan with high amount of UA groups responded strongly on beating, resulting in improved tensile strength.

It was shown by Horvath et al. These lignins had also a higher MW M-w g mol -1than the eucalyptus lignin M-w g mol The hydrogen peroxide bleaching efficiency i.

Nordic Pulp and Paper Research Journal: A non-linear relationship between physical dot enlargement and printing pressure was visualised, resulting from increasing printing form deformation.

Improved modified kraft cooking, Nord. Use abbreviations of journal titles; see e. The results indicate that the phenolic OH content, MW and glass transition temperature increased with longer cooking times for the softwood SW lignins.

Nordic Pulp and Paper Research Journal

Svensk Papperstidning References to unpublished work or literature not available to the general reader, or only submitted for publication, are not allowed. The present study focuses on kraft pulping and how the wood species eucalyptus, pine, and spruce and variable cooking times influence the characteristics of dissolved lignins.

A mathematical model for printing plate deformation has been proposed that takes into account elastic deformations. Keywords kraft cooking, spruce, tensile strength, uronic acid, xylan National Category Paper, Pulp and Fiber Technology Identifiers urn: From Tappi J.

Eucalyptus lignin had higher sulfur content compared to SW. When the temperature becomes higher in the cooking stage, enough alkali is available for delignification reactions without the risk of alkali depletion in the chip core, so that the delignification is more homogeneous.

We would like to extend a warm thanks Bo Westerlind for his short but very professional and dedicated time with us at NPPRJ and we wish him all possible success in his future career. The increase was, however, most pronounced for the TMP.

Determination of fiber-fiber bond properties, In: Paperi Puu Pulp and Paper Canada: It was found that higher pressure and temperature during chip presteaming led to increased degradation and dissolution of hemicelluloses. The Editor-in-chief will be responsible for the peer review and decisions on acceptance of manuscripts, while production, marketing and publishing of the journal will be handled by De Gruyter.

Two latex films were prepared to characterise the surface tension properties through contact angle measurements, which were repeated several times for each latex film and testing fluid.

We are convinced that this is a perfect development for the Journal where we can get access to a modern editorial system and be part of a larger publishing company with a better spreading of the journal, while preserving our ability to control the scientific content and the peer review of the manuscripts submitted to the journal.Nordic Pulp & Paper Research Journal (NPPRJ) is an international scientific magazine covering science and technology for the areas of wood or bio-mass constituents, pulp and paper and including new fiber-based materials, recovery and by-products from.

Research Article Microbiology International Journal of Pharma and Bio Sciences ISSN MICROBIAL DEINKING OF PRINTED PAPER ELAVARASI NATARAJAN* Department of Biotechnology, Karpaga Vinayaga College of Engineering and Technology, Nordic Pulp Paper Res.

J.2, (). 4. Yang, Jan L., Ma, Jianhua, Pierce. papermaking process design,Nordic Pulp and Paper Research Journal, accepted for publication, In addition to the scientific journal articles listed above, this thesis is.

Journal of Pulp and Paper Science

(English) In: Nordic Pulp & Paper Research Journal, ISSNE-ISSNVol. 26, no 2, p. Article in journal (Refereed) Published Abstract [en] The objective of this work was to improve the understanding on how thermal treatments of mechanical pulps containing iron influence the unbleached brightness and hydrogen.

Cross-sectional structure of the secondary wall of wood fibers as affected by processing. Authors; I. Duchesne and G. Daniel, Nordic Pulp & Paper Research Journal 15 () Online ISSN ; About this journal; Reprints and Permissions; Personalised recommendations.

Nordic Pulp and Paper Research Journal (NORD PULP PAP RES J) RG Journal Impact: * *This value is calculated using ResearchGate data and is based on average citation counts from work published.

Download
Nordic pulp and paper research journal issn
Rated 4/5 based on 23 review